On Học nè, a "test" (đề) is a set of questions you can practise yourself, share with friends or give to a whole class. You can take the questions from material you already have or write them from scratch.
Open the Create dialog
- Sign in and go to My materials in the left sidebar.
- Press Create and choose Assessments.
- Pick one of two ways:
- Extract questions from PDF, DOCX document: when you already have the test as a file or as photos.
- Write your own: when you want to write every question yourself.
Tip: you can drag a file straight onto the Create dialog to jump to the first way.
Upload a whole folder
Already have a folder of tests, notes or lessons? In the Create dialog, choose Upload a whole folder under Notes, Flashcards, Assessments or Folders. Learning paths take a whole folder in their first step too.
- Pick the folder. An older phone that cannot pick a folder can pick several files or a
.zipfile. - Học nè tells you how many files it can read and which it skips, with the reason. Duplicates keep one copy, and you can keep the other if you need it.
- If you like, tell the AI what you want, such as "one folder per chapter, tests apart". Then press Draft the outline. The AI reads each file's name, page count and first lines to propose a layout. It can be wrong, so all of it is yours to change: rename, change a document's kind, move it, drop a file, or ask the AI to rewrite. To skip the AI, press Skip the AI, keep the folder as it is.
- Answer files are matched to their tests. Học nè reads Excel, Word and text PDFs itself, at no credit cost.
- Press Create N documents. The work runs in the corner of the screen while you do something else. Each document lands where the outline put it.
You can upload 10 files at a time, with no limit on Pro.
Added files to the folder on your device later? Press ⋮ on that folder in My materials, choose Update from this device and pick the folder again. Học nè adds only what is new or changed. What is already there stays as it is, your edits too. A changed file becomes a new document beside the old one. If you closed the page last time, the files that were not finished are done now.
Take questions from a PDF, a DOCX or photos
See an example on the Questions from a file page.
Once you choose a file:
Under the file's name is how it is read, with one link to switch to the other way:
- A Word file (.docx) - Read with the algorithm: Học nè reads it right away, free of charge. It recognises questions, choices, parts (PART I, PART II...), formulas and figures, and copies exactly what the file says. If the Word file holds photos of the test instead of text, press AI reads each page: Học nè draws each page as a picture (with the file's own text beside it) for AI to read.
- A PDF with text - Read with the algorithm: Học nè reads the whole file, free of charge - questions, choices, parts, figures and the file's bold, italic and underlined words. Học nè does not write formulas itself: each question with a formula is cut into one picture (its stem, choices, answer and solution) so that the AI rereads questions with formulas and rewrites that question - the question's number, kind and answer stay Học nè's. A part's instructions or a passage with a formula is reread the same way. The card's The AI rereads questions with formulas row picks which AI reads, or Keep as images keeps those questions as pictures without any AI. If the AI could not read them all, the test is not saved yet: a dialog shows how many questions are left so you can choose another AI or Keep as images for those - the questions the AI already read stay as they are. With AI Học nè, a dialog shows the questions, today's free ones and the price before it reads. To have the AI read every page, press AI reads each page.
- A scanned PDF or photos (or a PDF Học nè could not read): AI optical character recognition (OCR) reads each page - with the PDF's own text where it has some - and copies the questions, the price shown before it reads. A file of any length can be read, even hundreds or a thousand pages; to read only part of it, choose the page range.
Reading with AI needs an AI to run on: your own free AI (Gemini, Mistral or Groq; see how to get a key) or AI Học nè - a number of pages a day are free, then it is paid with credits.
Photos of each page: if the test only exists on paper, choose Photos of each page to photograph each page with your phone or pick photos you already have. You can reorder the pages and crop each one before it is read.
When reading finishes, the test editor opens with the questions it found. The original pages sit next to it in the Compare panel so you can check each question. Học nè keeps those pages for 1 day, then deletes them. If a test read by the algorithm came out wrong, press Report a reading problem there: the report opens in a new tab with the file already attached. Học nè uses your file only to fix the problem, for nothing else. If the test has serious errors or a broken structure, leave the editor, upload the file again and choose AI reads each page: a new test is made, and the old one stays in My materials for you to delete.
Write your own
Choose Write your own to open an empty test. Add questions with the "+" between questions, choose a question type (multiple choice, True/False, short answer, essay) and type the content.
Edit in the test editor
- Click a field to edit the question, choices, answer or worked solution. Every change is saved automatically.
- Formulas: type LaTeX between two
$signs, or use the formula button, which has a keypad like a handheld calculator. - Pictures and tables: insert a picture from your device, take a photo, paste a copied picture, or build a table right inside the question. On a phone, tap a picture in a question to choose it: it shows its frame, four corners to drag to a new size, and the buttons Edit image, Caption and Turn picture into text. Tap the picture again to type around it; tap anywhere else to let it go.
- The Images tab: every picture of the test stands in the right panel, each with a name: Image 1, Image 2…; a picture the AI made from Image 2 stands beside it as Image 2.1, Image 2.2. The copy button beside a name copies the picture's code to paste into a question. Select one, then drag Drag to a question onto the question you want. On a phone, press Add to question….
- Draw: open the Images tab and press Draw (on its tool row, or in the middle of the tab while the test has no picture). Plane figures and solids stand on one board and are saved as one picture. Press Add at the head of the tools to set more into the same figure: a plane figure, an Oxy graph, the unit circle, a number line, forces, a variation table, a sign table, a chart, a Venn diagram, a tree diagram, a Graph of vertices and edges from graph theory (Học nè lays the vertices out, and you can drag them), a Diagram (words on a grid, lines between them, dots where two lines cross), Ready solids (pyramids, a frustum, prisms, a box, a cube, a regular octahedron, and the round ones: cone, cylinder, sphere, frustum, with points on a rim and a level cut), A solid of your own, Oxyz space and My shapes. Each thing is a part of its own on the figure: press a part to work on it, drag the grip at the top of its frame (or the body of a table or a chart) to move it. Selecting, as in Figma: what is selected wears a frame: drag inside it to move, drag a corner to resize (hold Alt: about its middle), drag the round knob to rotate (hold Shift: 15° at a time). Hold Shift as you press, or turn on Select several (the button beside Add), to add or take away; drag a box on empty paper to select everything inside it. With several selected, a bar offers Align, Group, Duplicate, Lock, Delete (on a phone it sits right under the tools). Esc, or a press on empty paper, lets everything go. A Locked part can still be selected but not moved, resized or deleted. Alt + drag pulls out a copy; the arrow keys move by 1 mm (hold Shift: 5 mm); Shift + 2 zooms to what is selected. Solids: only a selected solid turns in space: drag the turn knob at its frame's corner, or hold the middle mouse button. Draw a solid with plane strokes (points, segments, dashes), select all of it and press Turn into a 3D solid: Học nè reads it as a pyramid, a prism or a frustum and stands it where you drew it. Or, in A solid of your own: place points, select them, Ctrl + D to duplicate them in place, drag the blue arrow to lift the copy, select everything and press Join into a solid. A selected point wears three arrows (red: across, green: in depth, blue: up); with several points, pick Move, Turn or Resize. On an Oxy graph a selected point wears two arrows, along Ox and Oy. Solids of revolution: draw a plane shape (a triangle, segments joined end to end, or a graph), select it, with a straight line as its axis if you want one, and press Revolve about an axis: the shape turns into a solid where it stands. A selected round solid has handles for its height, its radius, its small base, its cut and each point of the turned outline; Watch it revolve shows the plane shape turning into the solid. Two points may wear the same label: Học nè keeps them as two points. My shapes: select a shape and press Save to My shapes (the ⋮ menu) to set it down again from Add; it is kept in this browser. Two buttons, Tidy up (the parts on a grid as wide as an A4 page) and Captions A. B. C. (a letter under each part, as the figure is read: the top row first, left to right; after Tidy up, in the list's order, which Move up and Move down in a part's ⋮ change), stand over the list once the figure has two parts. To keep one part as a picture of its own: press the name tab at its frame's corner to choose the whole part, Copy (Ctrl+C), open a new Draw, then Paste (Ctrl+V). On a phone, press and hold a thing on the figure for its menu (rename, delete…); on a narrow screen, Properties, full screen and Clear the figure stand in the ⋮ at the board's head. Pick a tool on the row of icons and press the board: the stroke you are about to draw shows exactly as it will stand, and the line on the board says the next step. For a dashed line, pick Dashed in the Lines group. The Marks & measures group: rest the pointer on a side, an angle or a shape and the mark shows exactly as it will be drawn; one press adds it (equal-length marks, parallel marks, angle arcs, right angles, measures). The dashed line round the figure is the Picture frame (press the ⓘ beside it): exactly what is saved. The squares only help you place things and are not printed; the figure saved into the test is the figure on the board. The board saves by itself a few seconds after each change and as it closes; its head says Saved. Press Done (or the back arrow) when you have finished. If it could not be saved, press Try again; the drawing is still on the board.
- Objects: the column at the left of the board. On the whole screen it stands open; while the board is in its panel it starts closed: press the button with a number at the head of the tool row to open it. With the column closed, the box you type in stands right under the tool row. Type
y = x^2 - 2x,x^2 + y^2 = 9,y > 2x + 1orA(1; 2)in the box and press Enter, and Học nè draws it. A letter left free, such asa, becomes a slider you can drag or set running; press the slider's number to set its value, its range From and To, and its Step. In the axes' options, the axis step sets how far apart the marks stand on each axis. Each row is one thing on the figure: press its dot to hide or show it, and its ⋮ menu to rename, dash, colour or delete. Rename: choose it and press F2 or Ctrl+R (or double-press its name; on a phone, tap it twice). A point's name changes on the figure; a graph given a name (say(C)) wears it beside its line. With two parts or more, each part is a row and the objects of the part in hand stand under it; a variation table, a chart and the other blocks are set in the Properties column at the right. Press a graph to see its vertex and crossings, and press one to pin it. Replay step by step walks through how the figure was built. - Changing a figure: drag a point and Học nè works the whole figure out again. Choose a triangle and press Sides to type its three lengths. Delete: hold and sweep over what should go, or hold the right mouse button whatever tool is in hand. Undo with Ctrl+Z. A measured length, angle or area shows in teal on the board and does not go into the test's figure; switch Print on the figure on in its row if you want it printed. The enlarge button takes the board to the whole screen; the next board opens in its panel again. Drag the edge of the Objects or Properties column to widen or narrow it; double-click the edge to put it back. Use two fingers to zoom; drag an empty spot to move the board. As in Figma: right-click for the menu of what is under the pointer, hold Shift and drag to box several things, Ctrl+C, Ctrl+V and Ctrl+D to copy, paste and duplicate; press ? for every shortcut. While you drag, a pink guide line shows when a point lines up with another. To change a saved figure: in the Images tab, double-press it, or select it and press Open on the board. A figure saved into a question shows at the size you drew it; drag a corner of the picture to resize it. Học nè moves labels clear of lines and of each other: a point's name turns round its point, a side's label slides along its side.
- Draw with AI: press ⋮ on a question, choose Draw with AI and pick an AI: the figure appears in that question. In the Images tab and AI tools, the AI draws on the board for you to go on. The AI reads the question or your words and names the figure, then Học nè works it out and draws it. The AI can get it wrong, so compare it with the test.
- Change one question's type: in the question's ⋮ menu, choose Change question type. The question moves into its own section with no instruction, shown as one faint line naming the type: that section only changes the type, is not numbered, and students don't see it. Pick the type of the section above on that line to remove it. Switching between multiple choice and True/False keeps the words of the choices.
- A section's instruction is optional: press Add instruction on the section's line to write one; delete all its words and the section goes back to a faint line.
- Answers: mark the correct answer for each question. A True/False question needs an answer for all 4 statements.
- Levels: tag each question Core, Applied or Advanced if you like.
- Undo: the undo button (or Ctrl+Z) takes the test back to before your last change.
Right after the find box is AI tools: what the AI does on the whole test is in this one menu. Make from this assessment makes a learning path, a deck, a note or a podcast from the test.
If you like, AI can fix typos, draft answers and solutions, or suggest levels. Choose the task in AI tools to run it on the whole test: every question is selected for you, clear the ones you don't need, then press Start AI. For a few questions, press Select, choose the questions, then choose the task. Everything AI suggests is shown for you to review and apply (see Is Học nè an AI app?).
Download as Word: the Download button downloads the test as a .docx file with formulas as Word equations; in My materials, a test card's ⋮ has Download (Word, PDF) too. Free accounts can download 3 files a month.
Word templates: in the right panel of Download the assessment (press an empty spot of the page to see it), Templates holds Học nè's: Standard, Compact, With solutions, Class test. Press one to use it at once (Undo takes it back). Rest the pointer on one and press the eye to see your test in it first, with nothing changed. Change anything on the page and the template in use comes first in the row, marked Edited: its ⋮ saves it into that template, saves it as a new one or discards the changes. Add a template at the end of the row has Save as a template, Import a template file and Design market; the ⋮ of a template of your own has Download the template file, Duplicate, Rename, List on the Design market and Delete. Your Word templates are kept in this browser: to use one on another computer, download its file and import it there. Notes and Flashcards have templates of their own, in Settings → Export → Word; there each template's ⋮ has Open the designer.
Publish the test
When the test is ready, press Publish. To publish, a test needs:
- a name, a Level and a Subject - several of each, any level with any subject (Grade 1 with Higher mathematics, Programming with Maths); an exam such as IELTS is on the Subject row too, and Find more finds a subject that is not shown. Add a Grade, a Scope or your own tags on the More tags row if you like. AI picks tags adds the tags that are missing - the ones you picked stay, the ones it adds wear ✦. The AI can be wrong: press a tag to drop it, or Undo to drop every tag it just added;
- an answer for every question (except essay questions, which are marked by hand);
- a choice of who can see it: Hidden, Friends or Public - under Hidden and Friends, Anyone with the link or a password if you need one.
A test not yet published stays in My materials, its card marked Draft; Filter → Draft shows only what is not yet published. The first time you leave the editor of an unpublished test, Học nè asks once: Publish now, or Later.
A published test gets its own link to share. If you edit the content afterwards, the test is unpublished until you publish it again, so nobody takes a half-edited version. See Share a test and open exam rooms.